SMART ARM ORDERING CODE

Mouse over the sections of the example model number above more information on each aspect of the smart arm.

Smart Arm Model Selection

Mouse over the sections of the example model number above for more information on each aspect of the smart arm.

EL815

ETA Model numbers are broken down into the following sections

Custom Part - Frame - Tool Holder - Encoder - Options

SP-
"SP" prefix used only when Arm is customized or has non-standard components.
EL815-
Frames
EL506
Standard Duty Untooled Arm for lighter tools and fixtures
EL306
A shorter version of model EL506-N with less reach for smaller work areas. 10.3" (261mm) Vertical Travel
EL806
Medium Duty Untooled Arm with more rigid Parallel Rack than the 506
EL815
Heavy Duty Untooled Arm has a rigid Parallel Rack like the 806 with a larger Float Cylinder for higher tooling weights
EL315
A shorter version of our EL815-N for smaller work areas. 10.3" (261mm) Vertical Travel
EL1015-B125
Extra Heavy Duty Untooled Arm has thick Parallels with Cross Ties for even more rigidity and a larger diameter Shoulder Pin and Bearings than the 815.
EL1015-N-B250
Same as EL1015-N but with B250 Base Kit for extending the EL1015-N more than 12" from the mounting surface.
EL1025
The same Extra Heavy Duty Parallel Rack as EL1015 but with our largest float cylinder and balance controls added for 25 lb (11.4 Kg) tooling weight capacity.
UV-
Tool Holders
About Tool Holder Model Numbers:
While all Tool Holders purchased separately, without an arm, contain -TH in their model number, when configured with an arm the -TH is eliminated.
Example: PS-TH holder and EL815 arm combined = model EL815-PS-__SA.
N
UV
TUV
RAV
PS
PT
SRA
RAH
RAHV
IPHV
FR
FRS
EXUV
LDUV
NB
NBBR
ASG
QXP
QE4
QE6
AVSA
X/Y Encoders
GCSA
Gray Code Models
AVSA
Analog Models
AMSA
Analog Models
IOSA
IO-Link Digital Models
XXSA
Encoder Ready Models
-OM
Options*
*Consult your ETA factory Rep to discuss option compatibility or arm customization.
OM
Overhead Mount
ZF
Zero Fold Elbow with Magnetic Park
ZAV
Z Axis .1-10 V Analog
ZAM
Z Axis 4-20 mA Analog
RS2
Rotational Stop
B250-0
Heavy Duty Base Kit
IRSH
Inline Remote Start Handle

SP-
"SP" prefix used only when Arm is customized or has non-standard components.
EL815-
Frames
EL506
Standard Duty Untooled Arm for lighter tools and fixtures
EL306
A shorter version of model EL506-N with less reach for smaller work areas. 10.3" (261mm) Vertical Travel
EL806
Medium Duty Untooled Arm with more rigid Parallel Rack than the 506
EL815
Heavy Duty Untooled Arm has a rigid Parallel Rack like the 806 with a larger Float Cylinder for higher tooling weights
EL315
A shorter version of our EL815-N for smaller work areas. 10.3" (261mm) Vertical Travel
EL1015-B125
Extra Heavy Duty Untooled Arm has thick Parallels with Cross Ties for even more rigidity and a larger diameter Shoulder Pin and Bearings than the 815.
EL1015-N-B250
Same as EL1015-N but with B250 Base Kit for extending the EL1015-N more than 12" from the mounting surface.
EL1025
The same Extra Heavy Duty Parallel Rack as EL1015 but with our largest float cylinder and balance controls added for 25 lb (11.4 Kg) tooling weight capacity.
UV-
Tool Holders
About Tool Holder Model Numbers:
While all Tool Holders purchased separately, without an arm, contain -TH in their model number, when configured with an arm the -TH is eliminated.
Example: PS-TH holder and EL815 arm combined = model EL815-PS-__SA.
N
UV
TUV
RAV
PS
PT
SRA
RAH
RAHV
IPHV
FR
FRS
EXUV
LDUV
NB
NBBR
ASG
QXP
QE4
QE6
AVSA
X/Y Encoders
GCSA
Gray Code Models
AVSA
Analog Models
AMSA
Analog Models
IOSA
IO-Link Digital Models
XXSA
Encoder Ready Models
-OM
Options*
*Consult your ETA factory Rep to discuss option compatibility or arm customization.
OM
Overhead Mount
ZF
Zero Fold Elbow with Magnetic Park
ZAV
Z Axis .1-10 V Analog
ZAM
Z Axis 4-20 mA Analog
RS2
Rotational Stop
B250-0
Heavy Duty Base Kit
IRSH
Inline Remote Start Handle

SP-
"SP" prefix used only when Arm is customized or has non-standard components.
EL815-
Frames
EL506
Standard Duty Untooled Arm for lighter tools and fixtures
EL306
A shorter version of model EL506-N with less reach for smaller work areas. 10.3" (261mm) Vertical Travel
EL806
Medium Duty Untooled Arm with more rigid Parallel Rack than the 506
EL815
Heavy Duty Untooled Arm has a rigid Parallel Rack like the 806 with a larger Float Cylinder for higher tooling weights
EL315
A shorter version of our EL815-N for smaller work areas. 10.3" (261mm) Vertical Travel
EL1015-B125
Extra Heavy Duty Untooled Arm has thick Parallels with Cross Ties for even more rigidity and a larger diameter Shoulder Pin and Bearings than the 815.
EL1015-N-B250
Same as EL1015-N but with B250 Base Kit for extending the EL1015-N more than 12" from the mounting surface.
EL1025
The same Extra Heavy Duty Parallel Rack as EL1015 but with our largest float cylinder and balance controls added for 25 lb (11.4 Kg) tooling weight capacity.
UV-
Tool Holders
About Tool Holder Model Numbers:
While all Tool Holders purchased separately, without an arm, contain -TH in their model number, when configured with an arm the -TH is eliminated.
Example: PS-TH holder and EL815 arm combined = model EL815-PS-__SA.
N
UV
TUV
RAV
PS
PT
SRA
RAH
RAHV
IPHV
FR
FRS
EXUV
LDUV
NB
NBBR
ASG
QXP
QE4
QE6
QE8
ST61
AVSA
X/Y Encoders
GCSA
Gray Code Models
AVSA
Analog Models
AMSA
Analog Models
IOSA
IO-Link Digital Models
XXSA
Encoder Ready Models
-OM
Options*
*Consult your ETA factory Rep to discuss option compatibility or arm customization.
OM
Overhead Mount
ZF
Zero Fold Elbow with Magnetic Park
ZAV
Z Axis .1-10 V Analog
ZAM
Z Axis 4-20 mA Analog
RS2
Rotational Stop
B250-0
Heavy Duty Base Kit
IRSH
Inline Remote Start Handle

SP-
"SP" prefix used only when Arm is customized or has non-standard components.
EL815-
Frames
EL506
Standard Duty Untooled Arm for lighter tools and fixtures
EL306
A shorter version of model EL506-N with less reach for smaller work areas. 10.3" (261mm) Vertical Travel
EL806
Medium Duty Untooled Arm with more rigid Parallel Rack than the 506
EL815
Heavy Duty Untooled Arm has a rigid Parallel Rack like the 806 with a larger Float Cylinder for higher tooling weights
EL315
A shorter version of our EL815-N for smaller work areas. 10.3" (261mm) Vertical Travel
EL1015-B125
Extra Heavy Duty Untooled Arm has thick Parallels with Cross Ties for even more rigidity and a larger diameter Shoulder Pin and Bearings than the 815.
EL1015-N-B250
Same as EL1015-N but with B250 Base Kit for extending the EL1015-N more than 12" from the mounting surface.
EL1025
The same Extra Heavy Duty Parallel Rack as EL1015 but with our largest float cylinder and balance controls added for 25 lb (11.4 Kg) tooling weight capacity.
UV-
Tool Holders
About Tool Holder Model Numbers:
While all Tool Holders purchased separately, without an arm, contain -TH in their model number, when configured with an arm the -TH is eliminated.
Example: PS-TH holder and EL815 arm combined = model EL815-PS-__SA.
N
UV
TUV
RAV
PS
PT
SRA
RAH
RAHV
IPHV
FR
FRS
EXUV
LDUV
NB
NBBR
ASG
QXP
QE4
QE6
QE8
ST61
AVSA
X/Y Encoders
GCSA
Gray Code Models
AVSA
Analog Models
AMSA
Analog Models
IOSA
IO-Link Digital Models
XXSA
Encoder Ready Models
-OM
Options*
*Consult your ETA factory Rep to discuss option compatibility or arm customization.
OM
Overhead Mount
ZF
Zero Fold Elbow with Magnetic Park
ZAV
Z Axis .1-10 V Analog
ZAM
Z Axis 4-20 mA Analog
RS2
Rotational Stop
B250-0
Heavy Duty Base Kit
IRSH
Inline Remote Start Handle

Get in touch with us today

Ergonomic Tool Arms, LLC

P.O. Box 534

Doylestown, PA 18901

Phone: 855 TOOL ARM

Phone: (855) 866-5276

contact@toolarms.com

All rights reserved to SmartArms.com